New Arrival Super ICOM PRO N3+ For BMW Replace ICOM Next Supports DoIP J2534 Compatible with BMW ICOM Software

• SUPER ICOM PRO N3+ is an advanced diagnostic device built on the A1, A2, A3, and N3+ lineage, designed for BMW. It remains 100% compatible with the original special inspection software without any software changes and adds J2534 and DOIP capabilities.
• Like the N3, it follows a one code = one machine model, with wireless pairing bound to the device’s serial code for easy service and tracking.

Key Features

1) Synchronized Factory Upgrades

• Out of the factory with firmware version 147 and upgrades synchronized with the original factory.
• Future firmware updates can be downloaded from the official factory website and applied in the same way as the original equipment.

2) Wired + Wireless Modes

• Wired Mode: USB 3.0 interface for broad compatibility with modern PCs and tablets. Initial setup requires configuring a dedicated IP address.
• Wireless Mode: Low-power design to reduce heat and improve speed/stability. After an initial connection, it will automatically reconnect on boot. Note: Wireless mode requires disconnection from wired when active.

3) Dual Heat Dissipation

• Dual cooling solution: a fan plus a heat sink, enhancing durability and stability in high-temperature environments—uncommon in competing inspection devices.

4) Optimized Main Cable

• Supports K-line, CAN, and DOIP communications. The main testing cable is optimized for reliability beyond a standard OBD cable.
• Adds a one-key switch: press and hold for 3 seconds to toggle freely between Special Inspection and J2534 software modes.

Core Functions

1. Special inspection device (NEXT A3)
2. J2534 device compatibility
3. DOIP device
4. WIFI device connectivity

Technical Highlights

• Interfaces: USB 3.0, wired, wireless, J2534, DOIP, CAN, K-line, WiFi
• Firmware: Factory version 147 with future synchronized upgrade paths
• Connectivity: Dual-mode (wired + wireless) with automatic reconnection
• Thermal design: Dual cooling (fan + heat sink)
• Cable design: Optimized for stable K-line, CAN, and DOIP communications

Applications

• BMW vehicles requiring full configuration OBD2 diagnostics
• Scenarios needing J2534 passthrough and DOIP network diagnostics
• Workshops needing robust wired/wireless access in hot environments

Why Choose the N3+?

• Seamless compatibility with the original BMW diagnostic software (no software changes required)
• Expanded communication capabilities with J2534 and DOIP
• Improved reliability from dual cooling and optimized cables
• Efficient workflow with one-code-per-machine binding for easy support and tracking

FAQ

• Q: Can the SUPER ICOM PRO N3+ replace existing BMW diagnostic devices?
  A: Yes. It is 100% compatible with the original special inspection software and adds J2534 and DOIP support.

• Q: How do I switch between wired and wireless?
  A: The device supports both modes. Use the settings to select the mode, or use the one-key switch (hold for 3 seconds) to toggle between Special Inspection and J2534 modes.

• Q: How are firmware updates handled?
  A: The device ships with firmware version 147. Updates are available on the official factory site and can be applied following the provided steps.

• Q: Is an extra software license required?
  A: The device is designed to work with the original BMW diagnostic software; typically no additional license is needed, but refer to manufacturer guidance.

Conclusion

If you’re seeking a BMW diagnostic solution with strong factory synchronization, J2534 and DOIP support, plus reliable wired/wireless operation, the SUPER ICOM PRO N3+ is a compelling option. Share your BMW model year, diagnostic needs, and current setup for tailored configuration recommendations.