Menu
Register as a member to get lower discounts!!!
Register as a member to get lower discounts!!!
USD

Cart

Loadding...
Home>ALicar Vehicle Tools>ALicar Circuit Tester>BT400 4-in-1 Multi-function Car Truck Circuit Tester Battery Analyzer OBD2 Voltage Diagnostic Tools
BT400 4-in-1 Multi-function Car Truck Circuit Tester Battery Analyzer OBD2 Voltage Diagnostic Tools

BT400 4-in-1 Multi-function Car Truck Circuit Tester Battery Analyzer OBD2 Voltage Diagnostic Tools

US$ 61.20 US$ 68.00
Free Shipping

Copy and share this link on social network or send it to your friends

Copy
Adding to cart succeed
BT400 4-in-1 Multi-function Car Truck Circuit Tester Battery Analyzer OBD2 Voltage Diagnostic Tools
color:red,size:xxl
Subtotal: US$ 0
View My Cart
    • Product Name: BT400 4-in-1 Multi-function Car Truck Circuit Tester Battery Analyzer OBD2 Voltage Diagnostic Tools
    • Item NO.: 26546460
    • Weight: 0.5 kg = 1.1023 lb = 17.6370 oz
    • Category: ALicar Vehicle Tools > ALicar Circuit Tester
    • Creation Time: 2024-06-13
    • Battery replacement with ECU Memory Saved,
    • Current leakage detection and Record data and waveform up to 30 minutes.
    • OBD2 PIN OUT Voltage display,
    • Professional Battery analyzing, start testing, charging testing.

    4in1 12V 24V Professional Circuit Leakage Tester OBD2 Car Circuit Tester Battery Analyzer Voltage Diagnostic Tools


    BT400 Circuit Tester is a multi-functional Car Truck Circuit Tester with 1.77 inch TFT display, detecting CAN line and K-LINE voltage of OBD interface, detecting battery life, and auto leakage recorder function. It has a built-in over-reserve protection system for natural protection, and the recovery can help customers to replace the battery.


    BT400 Car Circuit Tester



    Battery replacement




    Protect the memory of the vehicle ECU when replacing the battery


    When your car battery needs replacement due to damage, use it to easily replace the battery in your car.

    Have an additional spare vehicle battery ready. Connect the device to the spare battery properly, ensuring the red clip is attached to the positive terminal and the black clip to the negative terminal. Insert the OBD2 adapter into the Data Link Connector socket in the vehicle. Choose the "Replace battery" function, press OK to proceed, and follow the displayed instructions to continue.



    OBD2 Port Pin Voltage Test



    Test OBD2 interface can work well


    Select the 'OBD-PIN' function, press OK to access, and you will be able to see the voltage value of each pin on the OBD2 Connector, displayed as shown in the picture.



    Circuit Leakage Test



    BT400 Circuit Tester test the vehicle circuit for leakage


    1. Get an additional spare vehicle battery ready. Properly connect the device to the spare battery, ensuring the red clip is attached to the positive terminal and the black clip is connected to the negative terminal. Insert the OBD2 adapter into the Data Link Connector socket in the vehicle.

    2. Choose the Current menu within the "Current" functions. This will take you to the waveform monitoring interface .

    3. Remove the car fuse or relevant electrical components to observe any changes in current. If there is a sudden drop or abnormality in current, it indicates a possible leakage in the fuse circuit or an issue with related components. Refer to the car's electrical system circuit diagram to pinpoint the location of the leak.

    Note:Please make sure the car is dormant,The device can save the data of leakage current for 30 minutes, and view the results through "playback waveform".



    Car Battery Test



    Cranking Test/Charging Test/Battery Data and health assessment


    BT400 Circuit Tester is also a car battery analyzer, through which you can conduct battery testing, charge testing, and start testing on the car to understand the health condition of the battery.

    choose“BAT Test ” Function,Then press OK to enter, there are CCA、JIS、 GB、SAE、MCA、 CA、DIN、IEC、 EN、BCI and other difffferent test standards.



    Software Support Lifetime Free Upgrade


    Please follow the Circuit Tester software update operating instructions and do not unplug the device during the update process.


    Step 1: Connect the device to the computer via USB cable. Open the upgradeoperation file "updata tool" in the upgrade folder on the computer, and thefollowing window will pop up (the upgrade interface);

    Step 2: Open "Battery Test" _ "Settings" _"USB Upgrade" on the device BT400and the device enters the upgrade interface;

    Step 3: On the software upgrade window of the computer, click Refresh to refresh and select the COM port, Select the upgrade file and click.



    BT400 Circuit Tester Support Muiti-language



    BT400 support 10 languages:

    English, Spanish, German, French, Italian, Portuguese, Polish, Chinese, Japanese, Korean



    BT400 Circuit Leakage Tester Parameters


    Cunnection Unit: OBD2 Adapter with Battery Clip
    Device Working Voltage: 8-30VDC
    Leakage Current Detection Range: 15mA-5A
    Battery CCA Standards range:20-2000 CCA
    Circuit Breaker Limitation: 5A